I'll try to explain it better. Any help would be appreciated, thanks in advance! Could this be a memory issue? Like I mentioned the hardware is all fine but this is some sort of deep seat driver issue. Because latency isn't as crucial when it comes time to mix, you should increase your buffer size. So here's my problem, i've done everything i found in the internet and nothing seems to fix it. When it doesn't work correctly.
This trick still should fix possible sample rate incompatibilities. However, I still have the issue every once in a while with my Mbox. When did the problem start? Not too sure but the drivers could be incompatible with Windows 7. Not sure if that fixed it. There must be a solution here? I recently bought a focusrite 2i2, and i wanted to plug it into cubase and record songs, after i had some trouble with defining the sound card, i managed to get the setings right.
Now after fixing the asio4all no sound issue you again can play and enjoy! You may have to before you can post: click the register link above to proceed. . You may try older Mixcontrol versions, 2. But anyways go to the second one. After go to the Output dropdown that is located on the bottom right of the mixer. You'll probably want to make sure you've installed the latest build of Fl Studio 11, probably version 11.
Threads that do not conform will be removed without notice. Also tried the Wasapi drivers, but this caused a horrible crash when rewinding. One problem down at least. We wasted quite a lot of time tring to fix this issue, so we thougt it could be helpful to share it with others having the same issue which can save you a lot of time. Okay let me try to go ahead and do this. It seemed like everytime I opened my web browser and tried to listen to music it would shut off. Then make sure you are on the master track.
You may have to before you can post: click the register link above to proceed. I'm having a very similar issue also, my output is set on SpdifOut 1 - SpdifOut 2. Unlikely anything to do with the above. Also many or not be related but my Symantec Endpoint protection is malfunctioning, so I'm reinstalling that. I then route a cable from that sound card output into the Saffire input, and it's output comes through the Saffire's built in mixer. I checked in the device properties and dxdiag.
If your post is calling someone out for something, it's probably not appropriate here. I've tried to locate the driver online and I don't think I can find it. Also I'd get rid of Asio4all use drivers from Focusrite website , disable onboard sound card and make sure the Saffire is default device in windows sound settings. Collab calls should go in the Collaboration Thread. You don't need to uninstall them, but you should at least disable all of these devices and drivers.
The Not Connected issue is related, since A4A can't output anything while it's configured improperly. We never had an issue using asio4all at 44,1 kHz although windows is using 48 kHz for system sound. This includes things like built-in sound cards, hi definition audio drivers, all the audio stuff that came resident with your computer when you bought it. I'm trying to figure out why I cannot select it from the Input drop down menu. I plug in my headphones to use maschine. Regards KevonK, Try the following see if it points you in the right direction.
What firewire connector are you using? I guess Asio4all worked best. Hey guys I am running Cubase Artist 7. I don't use a midi out track I just play each along each other. You have to give a little bit of latency or the computer won't be able to think straight and the sound will come out glitchy and distorted. At least 2 channels are needed. Thanks I'm having the exact same problem.
Will any new soundcard work, or does it have to be specfic? Supposed to make everything sound better. This is how I'd like it to work always. But this is very rare. Make sure that the Focusrite is the only audio device that your system recognizes across the board. Et voila - it work's.
No there aren't any problem with anything in dxdiag. Thanks for everyone who decides to lend a hand. Im using Fl studio 10, asio4all V2, I don't have a soundcard atm, just using the stock one. You are not a noob - this issue is pretty unique and unusual, and the solution is a little unexpected. Now last night I noticed YouTube played through the main speakers instead of defaulting to the laptop stock ones. If you believe your post or comment was removed in error, check the and include a link in a polite.